The Fantech Workstation Venice CW1 in Grey is an executive ergonomic office chair that combines adjustable head and arm support with a breathable mesh backrest and an auto-adaptive lumbar section. Its contoured seat, integrated leg rest and multiple adjustment mechanisms give you more ways to position the chair around your desk setup and preferred sitting posture. The CW1 offers more than backrest recline. You can adjust seating depth, unlock gentle side-to-side seat movement, reposition the armrests and extend the leg rest for a reclined break. These separate functions let you change different parts of the seating position rather than relying on a single tilt adjustment. Fantech Workstation CW1 Venice Key Features Adaptive Lumbar Support and a 3D Adjustable Headrest The lumbar section responds to changes in your sitting position, while the wide 3D headrest provides height and angle adjustment. These functions work differently: the lower-back support adapts with movement, and the headrest can be positioned to suit your preferred head support. The mesh backrest provides a breathable conta surface. 4D Soft Armrests with Multiple Positioning Options Adjust the armrests vertically, slide the support surfaces forward or backward, rotate them inward or reverse their positioning. These movements change both the height and placement of the arm supports, rather than limiting adjustment to a simple up-and-down motion. Molded foam padding provides a cushioned surface for your arms. Sliding Seat Depth Adjustment Move the seat forward or backward to adjust its position relative to the backrest. This changes the seating depth without requiring you to reposition the entire chair. Seat sliding is a separate adjustment from the armrest slide and the extension of the leg rest. Dynamic Side-to-Side Seat Movement Unlock the dynamic seat mechanism to allow gentle side-to-side rocking. This lateral seat movement is distin from reclining the backrest or swivelling the chair, adding another way to vary your sitting position. 150° Recline with an Extendable Leg Rest The backrest reclines up to 150° and offers four locking positions, including the original upright position. Extend the integrated leg rest when taking a reclined break, then fold and retra it beneath the seat when returning to your desk. The leg rest remains part of the chair rather than requiring a separate footstool. Four-Lever Controls, Height Adjustment and Swivel Mobility A wired-control mechanism with four levers provides access to the chair's adjustments, while a Class 4 gas lift handles height adjustment. The aluminium alloy base is fitted with PU silent wheels, and 360° swivel movement lets you change direction at your workstation. Technical Specifications Component Specification Fantech Series / Model Workstation Venice CW1 Model Number CW1 Produ Type Executive ergonomic office chair Color Grey Headrest 3D adjustable Lumbar Support Auto-adaptive lumbar support Armrests 4D soft armrests with molded foam padding Armrest Adjustments 10.5 cm height adjustment; 5 cm slide adjustment; 40° inward rotation; 180° reverse adjustment Backrest Recline Up to 150°; four locking positions including the original upright position Seat Adjustments Forward/backward seat depth adjustment; side-to-side rocking when unlocked Leg Rest Integrated, extendable and fold-away Control Mechanism Wired control with four levers Swivel 360° Seat Material PP / PA / shaping cotton Backrest Material PP / PA / mesh Base Material Aluminium alloy Casters PU silent wheels Gas Lift Class 4 gas lift, described by Fantech as BIFMA-certified Maximum Weight Load Up to 136 kg Overall Height 111–119 cm Seat Dimensions 52 cm width × 45 cm depth, as shown in the manufacturer's size diagram Base Width 73 cm Net Weight 25 kg Assembly Assembly required Compatibility & Important Information Check your available space: Compare the listed seat dimensions and 73 cm base width with your workstation. Allow additional clearance behind the chair for reclining and in front of the seat for the extended leg rest. Different movements have different limits: The backrest reclines up to 150°. The 180° adjustment refers to the armrest reverse movement, not a fully flat backrest. The four recline locking positions include the original upright position. Load and certification scope: Observe the maximum weight load of 136 kg. The BIFMA reference in the specifications describes the gas lift. Package Contents The CW1 assembly guide lists the following components: One seat assembly, one backrest assembly and one headrest Two armrests One five-star base and one gas lift Five casters Six M6 × 35 mm screws and four M8 × 20 mm screws One hex key Please to review Q: How far does the Venice CW1 backrest recline? A: The backrest reclines up to 150° and offers four locking positions, including the original upright position. Q: What adjustments are available on the 4D armrests? A: The armrests provide 10.5 cm height adjustment, 5 cm sliding movement, 40° inward rotation and 180° reverse positioning. Q: Does the seat move forward and backward? A: Yes. The sliding-seat mechanism allows forward/backward seat-depth adjustment relative to the backrest. Q: Can the seat move from side to side? A: Yes. The dynamic seat mechanism permits gentle lateral rocking when unlocked. This is different from the chair's 360° swivel. Q: Does the chair have an adjustable headrest and lumbar support? A: Yes. It features a 3D adjustable headrest and auto-adaptive lumbar support that responds to changes in sitting position. Q: Is the leg rest built into the chair? A: Yes. The integrated leg rest extends from beneath the seat and folds away when not in use. Q: What is the maximum supported weight? A: Fantech specifies a maximum weight load of up to 136 kg. Q: Does the chair support height adjustment and swivel movement? A: Yes. The chair features a Class 4 gas lift for height adjustment and 360° swivel mobility.
