The HPE 5400 PRO 480GB Enterprise SSD is a 2.5-inch solid-state drive designed for enterprise storage applications. Identified by HPE part number P54262-002 and HPE model VK000480GXNZA, it provides 480 GB of flash storage through a SATA 6 Gb/s interface. Based on the Micron 5400 PRO SSD series, this HPE-labeled drive offers a solid-state storage solution for systems with suitable 2.5-inch SATA drive connectivity. Its precise HPE part number and model identification help buyers distinguish this drive from other capacities, form factors and storage configurations. Key Features 480 GB Storage Capacity: Enterprise solid-state storage for operating systems, applications and data. SATA 6 Gb/s Interface: Connects through the SATA storage interface. 2.5-inch Form Factor: Designed for installation in suitable 2.5-inch SATA drive locations. Micron 5400 PRO Series: Identified as a 5400 PRO enterprise SSD on the original drive label. HPE Produ Identification: Carries HPE part number P54262-002 and HPE model VK000480GXNZA for accurate produ identification. Technical Specifications Component Specification HPE (Hewlett Packard Enterprise) HPE Part Number P54262-002 HPE Model VK000480GXNZA SSD Series Micron 5400 PRO Produ Type Enterprise Solid-State Drive Capacity 480 GB Form Factor 2.5-inch Interface SATA 6 Gb/s Micron Model MTFDDAK480TGA Manufacturer Part Number MTFDDAK480TGA-1BC1ZABHA Power Rating 5 V / 1.7 A Firmware Identifier HPG1 Compatibility & Important Information Drive Interface: Requires a compatible SATA storage connection. This is a SATA SSD, not an NVMe or SAS drive. Physical Installation: Uses a 2.5-inch drive form factor. The target system must provide suitable physical mounting and SATA connectivity. HPE Server Compatibility: Server model, storage controller, firmware and drive carrier requirements must be checked against the specific HPE system documentation. Produ Identification: HPE part number P54262-002 and HPE model VK000480GXNZA identify this particular drive. Other HPE storage part numbers should not be treated as interchangeable solely because their capacities and interfaces are similar. Storage Specification Series Micron 5400 Pro Capacity 480 GB Interface SATA III Form Factor 2.5" Max Sequential Read Up to 540 MBps Max Sequential Write Up to 410 MBps Warranty Warranty 1 Year Please to review Q: What is the capacity of the HPE P54262-002 SSD? A: It provides 480 GB of solid-state storage. Q: What interface does the HPE P54262-002 use? A: It uses the SATA 6 Gb/s storage interface. Q: Is this SSD a 2.5-inch drive or an M.2 drive? A: It is a 2.5-inch SSD, not an M.2 drive. Q: Is the HPE P54262-002 an NVMe SSD? A: No. It uses a SATA 6 Gb/s interface rather than NVMe. Q: What is the HPE model number of this drive? A: The drive label identifies HPE model VK000480GXNZA and HPE part number P54262-002. Q: Which SSD series does this drive belong to? A: The drive is identified as a Micron 5400 PRO enterprise SSD. Q: Can this SSD be installed in any HPE server? A: Server compatibility depends on the specific HPE server model, storage controller, supported drive configurations and carrier requirements. A matching SATA interface alone does not establish server compatibility.
