The Legrand Keor SP 2000VA 1200W is a single-phase, line-interactive Uninterruptible Power Supply (UPS) designed to provide temporary battery backup and automatic voltage regulation for connected electrical equipment. With a rated capacity of 2000 VA and 1200 W, it helps maintain power during mains interruptions while its internal Automatic Voltage Regulator (AVR) manages voltage fluctuations. This German-socket version, manufacturer reference , features two German CEE 7/3 outlets and two IEC C13 outlets. It combines sealed VRLA batteries, a three-color LED status bar, audible alarms, USB and RS232 communication interfaces, and a USB charging port in a compa freestanding design. Key Features 2000 VA / 1200 W Capacity: Provides battery-backed power for connected equipment operating within the UPS rated limits. Line-Interactive Technology with AVR: Regulates voltage fluctuations and provides temporary power during mains interruptions. German and IEC Outlets: Two German CEE 7/3 sockets and two IEC C13 outlets, all specified as battery-backed outputs. Integrated Battery Backup: Two 9 Ah sealed VRLA batteries with a manufacturer-specified minimum backup time of 5 minutes at 80% load. Clear Operating Indicators: Three-color LED status bar, audible alarms and mute function provide convenient status monitoring. Communication and Charging: USB HID and RS232 interfaces for UPS monitoring, NAS compatibility and a dedicated USB Type-A charging port. Technical Specifications Component Specification Legrand Model Keor SP 2000 VA Manufacturer Reference ) UPS Technology Single-Phase Line-Interactive (VI) Rated Power 2000 VA Active Power 1200 W Output Waveform Simulated Sine Wave Nominal Input Voltage 230 V AC Input Connection IEC C14 Output Voltage 230 V ± 10% Output Sockets 2 × German CEE 7/3 + 2 × IEC C13 Voltage Regulation Automatic Voltage Regulation (AVR) Battery Configuration 2 × 9 Ah VRLA Batteries Backup Time Minimum 5 minutes at 80% load (manufacturer specification) Communication Interfaces USB HID (Type B), RS232 USB Charging Port USB Type-A, 5 V Status Indicators Three-Color LED Bar (Green / Orange / Red), Audible Buzzer Protection Features Overload, Short Circuit, Discharge, Overcharge and Surge Protection Surge Rating 312 J Dimensions (W × D × H) 148 × 380 × 173 mm Operating Temperature 0–40 °C Noise Level ≤ 40 dB Compatibility & Important Information German Socket Variant: Manufacturer reference features two German CEE 7/3 outlets and two IEC C13 outlets. Check the plug types used by connected equipment. Load Requirements: Total connected equipment must remain within both the 2000 VA apparent power rating and 1200 W active power rating. Output Waveform: The UPS uses a simulated sine wave rather than a pure sine wave. Confirm the power supply requirements of the connected devices before purchase. Temporary Battery Backup: Backup duration depends on the electrical load, battery condition and operating environment. The manufacturer specifies a minimum of 5 minutes at 80% load. System Monitoring: USB and RS232 interfaces enable UPS monitoring and supported emergency shutdown functions for Windows and Linux systems using compatible management software. NAS Compatibility: NAS support is listed by Legrand; verify communication compatibility with the intended NAS system. Installation: Maintain appropriate ventilation clearance and follow the Legrand installation manual. Please to review Q: What is the power capacity of the Legrand Keor SP 2000VA UPS? A: The UPS provides 2000 VA of apparent power and 1200 W of active power. The total connected load must not exceed either rating. Q: How many outlets does the German version have? A: Manufacturer reference ) has four battery-backed outlets: two German CEE 7/3 sockets and two IEC C13 outlets. Q: Does the Legrand Keor SP 2000VA provide pure sine wave output? A: No. This UPS uses simulated sine wave output. Check whether connected equipment requires a pure sine wave UPS. Q: How long can the Keor SP 2000VA operate on battery power? A: Legrand specifies a minimum backup time of 5 minutes at 80% load. Actual runtime depends on the connected load, battery condition and operating environment. Q: Does the UPS have automatic voltage regulation? A: Yes. Its built-in AVR stabilizes voltage fluctuations to help prote connected equipment during mains disturbances. Q: What batteries are used in the Keor SP 2000VA? A: The UPS is equipped with two internal 9 Ah VRLA sealed lead-acid batteries. Q: Can the UPS communicate with a computer or NAS? A: Yes. Legrand provides USB HID (Type B) and RS232 communication interfaces and lists NAS compatibility. Specific monitoring and shutdown functions depend on the connected system and supported software. Q: Does it provide a USB charging port? A: Yes. The UPS includes a 5 V USB Type-A charging port for mobile devices, separate from its communication interfaces.
